Geekvape Z Nano Tank – 2ml 510 Drip Tip

If you are looking for a new drip tip that is a bit different than your standard 510 styles, you may want to consider the Geekvape Z Nano Tank. This is a relatively new product that has been making some waves. It is relatively inexpensive, so if you’re looking to get into vaping, this is a good option. However, there are a few things to consider before purchasing one.

Airflow

If you’re looking for a small sub-ohm tank that provides excellent flavor, you should check out the Geekvape Z Nano Tank. It’s a very compact tank, and it features an adjustable top airflow.

The atomizer is designed for easy coil replacement, but a coil removal tool is included with the kit. This coil removal tool can be used to easily remove the coil from the base of the tank.

One thing that makes the Geekvape Z Nano Tank stand out is the fact that it comes with a Delrin drip tip. This drip tip is easy to remove from the top cap, and it also has an O-Ring on the top. These are essential for an airtight seal.

In addition to the extra drip tip, the Geekvape Z Nano Tank also has a 510-threaded connection, so it can be paired with a wide variety of mods. A standard 2ml bubble glass tube is included, and there’s a quarter-turn top fill system.

There are a number of different finishes to choose from, including straight-up stainless steel, anodized aluminum, and a durable coating. They are all very well made, and the extra bubble glass tube is a nice touch.

The Airflow on the Geekvape Z Nano Tank is great, and it works well for both MTL and DTL vaping. It can be adjusted for ease of use, and there’s a stopper that prevents the airflow ring from spinning.

This small tank provides a great level of flavor, but the airflow system can be a little tight. You could get a tighter draw if you were to use a higher-resistance coil. That’s because the airflow runs down through the middle of the coil, and up through the chimney-piece.

It’s really easy to fill the e-liquid tank with this atomizer. There are two kidney-shaped fill holes. However, you should be careful to not fill too quickly, as this can cause spills.

As with other Geekvape devices, the Zeus Nano Tank is fully assembled and has standard engravings. The tank has a 22mm diameter and is constructed of stainless steel.

Appearance

Geekvape has created another product in their popular Z Nano range. The Nano is a leakproof tank that is designed for MTL and DTL vaping. It features a high-dynamic top to bottom airflow.

This tank is very simple to use. Its parts are all designed to fit together and it is easy to disassemble. In the kit, there is an airflow ring, a 510 threaded connector, two coil heads, a boost coil spanner, a coil removal tool, and a spare 510 drip tip.

The Zeus Nano is available in a variety of finishes. You can get it in anodized, painted, or brushed stainless steel. All the finishes have an airtight seal that helps prevent the leaking of e-liquid.

The Geekvape Z Nano Tank is an updated version of the original Zeus Nano Tank. It is a leakproof tank that has a 2ml capacity. Designed to be compatible with the Geekvape B Series coils, the Nano features high dynamic top to bottom airflow.

Aside from its top to bottom airflow, the tank has an adjustable airflow ring. This ring can be closed and opened to adjust three airflow holes.

The base of the tank is a 510 threaded connector and the coil head is press fit. The press fit method is very convenient and works very well.

Besides its leakproof design, the Nano also includes Geekvape’s famous G-Boast Coils. These are designed for MTL vaping and deliver a well-rounded flavor.

With a slimmer profile and a taller drip tip, the Nano has a unique look. The 510 drip tip is a good choice for both MTL and DTL vaping. However, users should be careful not to pop the glass off the top cap.

Unlike its predecessors, the Z Nano comes in a variety of colors. While the finish is not paint, it is heat treated. Depending on your preference, you can choose from a rainbow of colors. Alternatively, you can go for the standard Stainless Steel.

Overall, the Zeus Nano has a stylish, elegant look. Its design is a combination of elements from its predecessors.

Mechanics

The Geekvape Z Nano Tank is a smaller version of the original Zeus Tank. It is only 22mm in diameter, but it can hold 3.5 ml of e-liquid. In addition, it uses the same top-to-bottom airflow system as the other tanks in the Zeus lineage.

This is a tank that is a perfect choice for restricted direct-to-lung vaping. It has a removable drip tip that reduces leaks. You can also change your resistance easily. It comes with two coils: 0.6 ohms for 15 to 25 watts and 1.2 ohms for 50 to 58 watts.

To fill the Z tank, you should unscrew the top cap. Once you do, you will find two kidney-shaped fill holes. Each of them is about half an inch wide. Filling the e-liquid tank too fast can lead to spills.

The top of the Z tank is designed to be leak-proof. It has a quarter-turn top-fill. However, it is not very resistant. As a result, you must be careful not to pop the glass off the top cap.

On the bottom of the tank is a 510 connection. The 510 drip tip is made from Delrin and is replaceable. A spare 510 Delrin drip tip is included in the package.

The Z nano tank is super easy to use. When you install your new coils, you must wait five minutes to allow the resistance to soaking in. Keeping the resistance wet is important so that the coil doesn’t burn or turn loose.

The 510 drip tip is a great option for MTL vaping. But you can also use the Z Nano Tank for the DL draw. It has an adjustable airflow ring to provide an airier draw.

Geekvape’s Z Nano 2 tank is a state-of-the-art clearomizer. It has an improved base connection to the coil and dual adjustable cyclops slots.

With its compact design, the Zeus Nano is ideal for anyone who is looking for a small tank that provides excellent flavor. You can choose from a variety of finishes including Silver, Gold, Gunmetal, and Rainbow.

Price

Geekvape Z Nano Tank is a small tank designed to produce dense vapor. It uses a top-filling design and utilizes Geekvape B-series coils to offer a great flavor. This tank has a capacity of 3.5ml and a diameter of 22mm.

The build quality of this device is excellent. It features a stainless steel construction with a heat-treated coating. You can also choose from several different finishes. Some of them include a durable coating and are powder coated.

The Geekvape Z Nano Tank is made for MTL and DTL vaping. It features a 510 drip tip that caters to both styles. If you prefer DL vaping, you will be pleased with the adjustable airflow ring. This ring has cyclops-style holes to provide a high level of airflow.

The Geekvape Z Nano 2 Tank is a great little device for MTL and DTL vaping. With a 3.5ml capacity, it is capable of holding enough e-liquid to last you a long time. The top airflow system ensures that there is a smooth, leak-proof, and consistent flow of air.

It is also easy to remove and replace the glass tube. There is a 2ml straight glass tube included with the tank. However, the liquid viscosity may restrict you from filling the tank. To get the most out of the product, it is recommended that you use a replacement 3.5ml bubble glass tube.

The Geekvape Z Nano Nano Tank offers an excellent leak-proof and top-filling design. It has a 510 drip tip that is compatible with most 510 threaded mods. Also, it is capable of using Geekvape B-series coils, allowing you to experience even heating over a large surface area.

Overall, this device is a good choice for all vapers. Its excellent leak-proof and top-filling designs make it a great tank to have in your possession. And its compact size makes it ideal for small mods. All in all, if you are looking for a new tank to try, the Geekvape Z Nano 2 is a must. Just keep in mind that its packing may vary from batch to batch.